200' x 35' Inland Hopper Barge 1998

Contact the Broker



ID: 5507

REF:
p1dg
Year:
1998
Flag:
US:
Location:
U.S. Gulf Coast
Price:
Price on Request
Length:
200'
Beam:
35'
Draft:
12'
Class:
None
Details:
200' x 35' Inland Hopper Barge 1998 For Sale.

200' foot Inland Hold Barge was built in 1998, the barge is a typical inland style open hopper barge. The barge has a raked bow with sheer deck forward, straight sides, and a transom stern.

Principal Dimensions and Characteristics
Year Built: 1998
Hull Material:
Steel

Length Over All: 60.96 m 200 feet
Beam: 10.67 m 35 feet
Depth: 3.66 m 12 feet
GRT/NRT: 750/705
Compartments
Hull is divided by five (5) transverse watertight bulkheads dividing the barge into one (1) bow
rake compartment, four (4) each port and starboard wing tank compartments with no centerline
bulkhead, and one (1) stern transom compartment. Compartments are each accessed via raised
coaming, watertight, 4-dog hatches.
Fender System
Hull is protected by a single strake of 152.4 mm x 19.05 mm (6 inches x 3/4 inch) flat bar located
just below deck on each side.
Deck Fittings
Deck fittings consist of 1,219.2 mm (48 inches) kevels at each corner of the hull, bow and stern
centerline 914.4 mm (36 inches) kevel, five (5) 914.4 mm (36 inches) kevels along each the port and
starboard sides, 254 mm (10 inches) diameter button bitt located at bow and stern on port and
starboard each, one (1) 914.4 mm (36 inches) kevel at bow and stern centerline, a rope chock
adjacentto each button bitt and an 203.2 mm (8 inches) diameter single bitt located near starboard
bow corner. Starboard stern kevel aft horn set in 50.8 - 76.2 mm (2 - 3 inches).

Full details to named buyers only.

Contact the Broker

Disclaimer: ALL DETAILS BELIEVED TO BE CORRECT BUT WITHOUT GUARANTEE - VESSEL OFFERED, AS IS, WHERE IS, SUBJECT TO PRIOR SALE, PRICE CHANGE, OR WITHDRAWAL WITHOUT NOTICE