300' x 90' Ocean Deck Barge 2011 – DWT 10 m2

Contact the Broker


ID: 5619

REF:
p1dg
Year:
2011
Flag:
Non US:
Location:
Singapore
Price:
Price on Request
Length:
300'
Beam:
90'
Draft:
18'
Class:
ABS
Details:
300' x 90' Ocean Deck Barge 2011 - DWT 10 m2 For Sale.
This 300-foot ABS Deck Barge w/10 t/m2 Deck Rating was built in 2011. She is "New and Unused, never launched" due to buyers nonpayment to shipyard. Free and clear of any liens or payments liquidating at 1/2 the sale price of newly built. The barge has never been in the water, the steel is marine coated at onset of building so the vessel remains in 100% pristine condition for all components i.e. hull, decks paint and she has her zinc anodes every 4 meters @ 15 Kilo each, below waterline. Her Classification Society/Class Notation is ABS (American Bureau of Shipping), +A1 Barge. The seller carries all her ABS Classification Documentation.

Located in Singapore

Principal Dimensions and Characteristics
Year Built: 2011
Classification Society/Class Notation: ABS (American Bureau of Shipping), +A1 Barge
Type Barge: Flat Top Deck Cargo Barge
Length Over All: 91.44 m...300 feet
Beam: 27.43 m...90 feet
Depth: 5.49 m...18 feet
Deck Load: 10 t/ m2
No. of W.T Longitudinal Bulkheads: 3
No. of W.T Traverse Bulkheads: 7
Plate Thickness:
Main Deck: 14 mm...0.55 inches
Bottom: 12 mm...0.47 inches
Side-shell: 12 mm...0.47 inches
Bulkheads: 8 mm...0.31 inches
Transom: 12 mm...0.47 inches
Web: Flanged plates of 8 mm (0.31 inches) thick at m (6 feet) apart with sizes subject to class approval.
Main Deck: 457.2 x 152.4 x 10 mm...18 x 6 x 0.39 inches
Bottom: 457.2 x 152.4 x 10 mm...18 x 6 x 0.39 inches
Side-shell: 457.2 x 152.4 x 10 mm...18 x 6 x 0.39 inches
Longitudinal Bulkheads: 457.2 x 152.4 x 10 mm 18 x 6 x 0.39 inches
Traverse Bulkheads: 457.2 x 152.4 x 10 mm 18 x 6 x 0.39 inches
Stiffeners: Unequal angles with sizes subject to class approval
Main Deck: 150 x 90 x 9 mm...6 x 4 x 0.35 inches
Bottom: 150 x 90 x 9 mm...6 x 4 x 0.35 inches
Side-shell: 150 x 90 x 9 mm...6 x 4 x 0.35 inches
Bulkheads: 150 x 90 x 9 mm...6 x 4 x 0.35 inches
Pillars:
Vertical: 150 x 150 mm Beam...6 x 6 inch Beam
Chine Bar: 65 mm (2.6 in.) diameter round bar
Deck Fitting


The barge will be provided with the following:
One unit of 10 ton hand winch, complete with one stockless anchor and wire rope.
Navigation light stand: 3 nos of steel light.
Zinc Anode: Welded type sufficient units at 15kg each.
Tire fender: Sufficient lorry tire fenders around the barge & secured to chain & shackle attached to welded pad eyes on deck edge at alternate frame.
Bollard: 8 sets, 4 nos. ranged on each side of the barge.
Manholes: 1 pc per tank x 18, all bolts and nuts shall be stainless steel.
Towing Brackets: 1 set (2 pcs) to be welded at forward deck.
Access ladders are fabricated to every tank.
Surface Preparation and Corrosion Prevention
After fabrication, the internal hull are power blasted and prime coated SA 2 and applied 1 coat
of coal tar epoxy brown, as the external hull to be blasted and prime coated SA 2 standard and
to apply paint as follows:
Main Deck and Outfit:
1 coat of coal tar epoxy brown
1 coat of coal tar epoxy black
1 coat primer
Bottom Deck:
1 coat of coal tar epoxy brown
1 coat of coal tar epoxy black
1 coat of tropical anti-fouling
1 coat primer
Bottom Deck:
1 coat of coal tar epoxy brown
1 coat of coal tar epoxy black
1 coat primer
Paint: Hempel

Full details to named buyers only.

Contact the Broker

Disclaimer: ALL DETAILS BELIEVED TO BE CORRECT BUT WITHOUT GUARANTEE - VESSEL OFFERED, AS IS, WHERE IS, SUBJECT TO PRIOR SALE, PRICE CHANGE, OR WITHDRAWAL WITHOUT NOTICE