360' x 100' Deck Cargo Barge Built 2019 – 2 Available

Contact the Broker


ID: 9222

REF:
h1de
Year:
2019
Flag:
Non US:
Location:
China
Price:
$3,650,000
Length:
360'
Beam:
100'
Draft:
21'
DWT:
15348
Class:
ABS A1
Details:
360ft x 100ft x 21ft DECK CARGO BARGE

Direct from owner have 2 units brand new 360ft x120ft x21ft (15t/m3) ABS A1 Deckbarge for sale.the sale price is USD 3.65 Million per unit.can delivery prompt in Shanghai China.

The light weight is 2900tons and deadwieght is 15348 tons.

The details plate thickness as follow:

Deck plate:18mm/15mm

Deck web:600x14+180FLG

Deck Side Gir:600x14+180FLG

Deck Longl.Stiff:180x110x12(within 0.4L)

Deck Longl Stiff:150x90x12 IA(Others)

Uniform deck load=15t/m2

Trans bulkhead:10mm

WITH BALLAST TANK
(DECK LOADING: 15T/M2
)
SPECIFICATION

1. GENERAL DESCRIPTION
The vessel is an unmanned dump barge suitably equipped for carrying deck cargo for Unrestricted
services. The barge is all welded steel construction. The bow shall be spoon type with steeper
slope for better towing speed and with two (2) skegs at Stern. The main hull is divided by 7
transverse W.T. bulkheads and 3 longitudinal Bulkheads into 30 compartments.
2. PRINCIPAL PARTICULARS
Length O.A. 109.8m (360ft)
Breadth MLD 36. 6m (120ft)
Depth MLD 6.405m (21ft)
Design Draft 4.80m
Deck loading 15T/M2
Deadweight abt. 14000.00t
3. VESSELS NAME
To be noticed and Barges to be able to register under Singapore Flag regulations.
4. CLASSIFICATION
a) ABS +A1 plates with Notation ABS +A1 Barge with ballast tank.
b) The barge shall be certified by ABS as being able to carry ballast in each of their tanks.
c) All Class Fees for plan reviews, survey and issuances of all certificates as required by
the Buyer be paid by the Seller.
5. MATERIAL & WORKMANSHIP
All material & workmanship will be of the highest quality, with all steel plates, sections, hull
forgings and castings meet with ABS Classification requirements and approval.

- 1 -

360ft x100ft x 21ft Deck Cargo Barge Specification

6. WELDING
The vessel will be welded constructed. Welding is to be carried out in accordance with the
Classification's requirements and to the attending surveyor's satisfaction.
7. TEST
Prior to the delivery, the hull and other fittings etc. to be thoroughly tested to be satisfaction of the
Classification's attending surveyor.
8. STABILITY BOOKLET
The stability booklet is to be prepared and supplied by the builder based on the estimated lightship
weight or the results from lightship Survey if when required by the Classification.
9. SCANTLINGS
9.1 Plating
Deck plate 18mm & 16mm
Bottom plate 18mm & 15mm
Side shell 16mm & 14mm
Longitudinal BHD 10mm
Transverse BHD 10mm
9.2 Longitudinal
Deck longitudinal L180x110x12 & L150x90x12
Bottom longitudinal L180x110x12 & L150x90x12
Side longitudinal L150x90x12
Transverse Bulkhead stiffeners L160x100x12
Longitudinal Bulkhead stiffeners L150x90x9
9.3 Girder
Deck girder L600x14+180FLG
Bottom girder L600x12+150FLG
9.4 Web frame
Deck web beam L 600x14+180FLG
Bottom web floor L600x12+150FLG
Side web frame L600x12+150FLG
Longitudinal BHD vertical girder L600x12+150FLG
Transverse BHD horizontal girder L650x10+130FLG
Transverse BHD vertical girder L660x16+220FLG
9.5 Pillars
Verticals H390x300x10x16

- 2 -

360ft x100ft x 21ft Deck Cargo Barge Specification
Diagonals H200x200x8x12 & H250x250x9x14
Details according to the approved drawings by ABS
9.6 Skegs
Skegs shall be fitted port and starboard. The inter hull shall be suitably stiffened to provide good
protection if the vessels runs aground.
10. OUTFITTINGS
1) Sideboard L100.65m x B32.94m x H3.66m
Plate 10mm / 14mm
Longitudinal L125x80x8 & L200x125x12
Vertical web H175x175x7.5x11
2) Mooring bollards:
Eighteen (18) 50-MT "Double Bitt Bollards", recess type.
3) Manholes
Flush type watertight manholes of 600 x 400 on main deck are to be provided for every
Compartment. Studs, washer and nuts are to be stainless steel. All manholes to have rubber
gaskets.
4) Four (4) nos. Fairleader for 2 nos. Smith Bracket (400-Ton) at forward and 2 nos. Smith
Bracket (400-Ton) at stern. Towing Smith Bracket be flush deck type.
5) The anchor and winch: Stockless Anchor 2850kg, with chain C48, Chain Stopper, Steel Wire
diameter 48mm, and Anchor Winch 100 KN driven by diesel oil, Anchor Support arrangement at
forward to be as Owner's requirement.
6) Fender
Fender shall be flat bars of abt. 30mm thick, 2 row horizontal and diagonal plates in between, slant
at 60 degree, space at every 3.5 feet from each other.
7) One set of navigation lights. Include p & s lights and aft light.
8) Tyre Fender: About 58 pieces Truck Tyre to be installed around the Barge. Diameter of tyre to
be abt.1100-1300mm. Chain and shackle of size 25mm are to be provided.
11. PAINTING OF HULL OUTSIDE
The tin-free internal coating with Builder's warranty for three (3) years to withstand carriage of
sea water. Maker: IP or Hempel or Jotun.
All steel plates of hull (out of bottom/side/deck plates) and all steel materials of sideboard are to
be sand blasted. All part of steel materials are to be cleaned to as a high standard as possible in
order to remove all the dust prior to painting with marine primer. All steel surfaces are to be free
from grease and free from moisture before priming coats are applied. All coats are to thoroughly

- 3 -

360ft x100ft x 21ft Deck Cargo Barge Specification

dry before further coats are applied on top.
The board pretreatment to Sa 2.5 or ST3, according to the paint surveyor's suggestion.
Painting schedule to be final determined by buyer, supplier and shipyard.
12. CATHODIC PROTECTION
Aluminum anodes: 3 years protection warranty.

Contact the Broker

Disclaimer: ALL DETAILS BELIEVED TO BE CORRECT BUT WITHOUT GUARANTEE - VESSEL OFFERED, AS IS, WHERE IS, SUBJECT TO PRIOR SALE, PRICE CHANGE, OR WITHDRAWAL WITHOUT NOTICE